Je kan het ook naar een bedrijf als Shapeways sturen. Zij printen het dan voor je uit en sturen het op.quote:Op zaterdag 17 november 2012 21:50 schreef bobbernaut het volgende:
Waarom zijn 3D printers zo duurik wil echt maar 1 klein ding printen
Of gratis zelf printen bij 1 van de fablabs in Nederland. Moet je wel zelf materiaal regelen.quote:Op zaterdag 17 november 2012 21:50 schreef bobbernaut het volgende:
Waarom zijn 3D printers zo duurik wil echt maar 1 klein ding printen
Nice, een grote printer met goeie precisie en die 14 materialen tegelijk kan gebruiken om te printenquote:Op dinsdag 4 december 2012 02:31 schreef Probably_on_pcp het volgende:
Next Year’s 3-D Printers Promise Big Things — Really Big Things
2012 has been a big year for 3-D printing, but the industry has quietly been growing for decades. And the innovations are impressive — for every new plywood-clad 3-D printer kit that makes the rounds on the internet, engineers are developing ways to print titanium parts for jet engines that will change the aerospace industry.
[ afbeelding ]
This week at Euromold, a manufacturing trade show, the companies behind these devices are demonstrating new products and highlighting the novel technologies that will change the way we build things. The 3-D printing industry is on track to be a $3.1 billion business by 2016 and the innovations on display this week show its foundation is growing — both in revenue and in physical print size.
Objet 1000
The big news out of Euromold is really big — a 3-D printer so large that it requires a palette jack to unload. The newest 3-D printer from Objet combines their world-class accuracy (16 micron/0.0006 inch layer thickness) and the ability to create models with 14 materials in one print job with extraordinary size. The new Objet 1000 is named for its 1000 x 800 x 500 mm (39.3 x 31.4 x 19.6 inches) print area which is over three times the size of competitive printers. To put this in perspective, the Objet 1000 holds over 238 pounds of resin to print with, more than some 3-D printers weigh.
[ afbeelding ]
Size matters in 3-D printing. An oversized build chamber, along with print materials that come close to that of mass-production counterparts, means engineers can apply additive fabrication to new classes of products. Instead of being limited to printing small components like a bike helmet or pedal, engineers can now print an entire bike frame in one shot. It may not be a practical replacement for carbon fiber or tubular steel yet, but with a few more years of work, don't be surprised to see a 3-D printed bike winning the Tour de France.
http://www.zeitnews.org/n(...)gs-really-big-things
Wat zal zoiets nu kosten? Paar ton? Miljoen?quote:Op dinsdag 4 december 2012 02:31 schreef Probably_on_pcp het volgende:
Next Year’s 3-D Printers Promise Big Things — Really Big Things
2012 has been a big year for 3-D printing, but the industry has quietly been growing for decades. And the innovations are impressive — for every new plywood-clad 3-D printer kit that makes the rounds on the internet, engineers are developing ways to print titanium parts for jet engines that will change the aerospace industry.
[ afbeelding ]
This week at Euromold, a manufacturing trade show, the companies behind these devices are demonstrating new products and highlighting the novel technologies that will change the way we build things. The 3-D printing industry is on track to be a $3.1 billion business by 2016 and the innovations on display this week show its foundation is growing — both in revenue and in physical print size.
Objet 1000
The big news out of Euromold is really big — a 3-D printer so large that it requires a palette jack to unload. The newest 3-D printer from Objet combines their world-class accuracy (16 micron/0.0006 inch layer thickness) and the ability to create models with 14 materials in one print job with extraordinary size. The new Objet 1000 is named for its 1000 x 800 x 500 mm (39.3 x 31.4 x 19.6 inches) print area which is over three times the size of competitive printers. To put this in perspective, the Objet 1000 holds over 238 pounds of resin to print with, more than some 3-D printers weigh.
[ afbeelding ]
Size matters in 3-D printing. An oversized build chamber, along with print materials that come close to that of mass-production counterparts, means engineers can apply additive fabrication to new classes of products. Instead of being limited to printing small components like a bike helmet or pedal, engineers can now print an entire bike frame in one shot. It may not be a practical replacement for carbon fiber or tubular steel yet, but with a few more years of work, don't be surprised to see a 3-D printed bike winning the Tour de France.
http://www.zeitnews.org/n(...)gs-really-big-things
http://krebsonsecurity.co(...)rs-for-atm-skimmers/quote:An ATM skimmer gang stole more than $400,000 using skimming devices built with the help of high-tech 3D printers, federal prosecutors say.
The skimmer components typically include a card skimmer that fits over the card acceptance slot and steals the data stored on the card’s magnetic stripe, and a pinhole camera built into a false panel that thieves can fit above or beside the PIN pad. If these components don’t match just-so, they’re more likely to be discovered and removed by customers or bank personnel, leaving the thieves without their stolen card data.
Apparently, word is spreading in the cybercrime underworld that 3D printers produce flawless skimmer devices with exacting precision. Last year, i-materialise blogged about receiving a client’s order for building a card skimmer. The company said it denied the request when it became clear the ordered product was a fraud device.
In June, a federal court indicted four men from South Texas (PDF) whom authorities say had reinvested the profits from skimming scams to purchase a 3D printer.
Nee de grotere kijk je naar tienduizenden of misschien een ton of twee ton. Maar ook die prijzen zullen omlaag gaan.quote:Op zondag 16 december 2012 18:06 schreef tjoptjop het volgende:
[..]
Wat zal zoiets nu kosten? Paar ton? Miljoen?
En bij welk bedrag beginnen printers die met zo'n poeder aan de gang gaan?
quote:MakiBox A6 Weekend Update - Alpha Finished, Beta Coming, Printing Improved
Published on Dec 8, 2012
We've hit the point where we are happy with the results from our internal Alpha testing, an are ready to move on to the Beta design production and getting it into other people's hands. This video shows the prototype printing and some samples of the output.
Hier heb je zo'n gek: Ik mag graag van dit soort dingen in elkaar prutsen:quote:Op donderdag 22 november 2012 09:58 schreef Kiyoaki het volgende:
[..]
Dat lijkt me wel een leuke toepassing hiervan eigenlijk, ik kan me herinneren dat die bouwpakketten altijd achterlijk duur waren, als dat dus je hobby is ben je denk ik goedkoper uit om zo'n printer te kopen en van internet schemaatjes te downloaden. Het waren immers meestal in malletjes gegoten repen plastic.
Je kunt m ook helemaal in 1 keer printen he?quote:Op maandag 17 december 2012 06:00 schreef Nemephis het volgende:
[..]
Hier heb je zo'n gek: Ik mag graag van dit soort dingen in elkaar prutsen:
[ afbeelding ]
Lijkt me super als je de onderdelen thuis kan uitprinten. Wordt een heel andere benadering van de hobby. Maar dan zul je wel eerst van alle onderdelen een 3D-ontwerp moeten maken op de computer of hopen dat iemand het online zet.
Zal wel een heleboel copyright-rechtzaken gaan opleveren als mensen zomaar zelf gaan maken wat we nu nog moeten kopen.
Da's niet leuk. In elkaar prutsen is part of the fun.quote:Op maandag 17 december 2012 06:17 schreef Probably_on_pcp het volgende:
[..]
Je kunt m ook helemaal in 1 keer printen he?
Dat snap ik, vandaar de -->quote:Op maandag 17 december 2012 06:21 schreef Nemephis het volgende:
[..]
Da's niet leuk. In elkaar prutsen is part of the fun.
Menselijk klonen hadden ze nu al gekund als het gemogen had, het mag niet, en ik ben m'n kloon nog niet tegen gekomen. Het zal wel meevallen, ik vrees dat mensen niet snel een organendrukkerij zullen beginnen. Het is medische apparatuur, de mensen die een MRI-scanner in hun schuurtje hebben staan zijn er ook niet veel.quote:Op dinsdag 18 december 2012 17:21 schreef Bonque54 het volgende:
Het is al bijna mogelijk om nieren en zelfs een hart te printen. Progressie is goed, maar dit kan totaal verkeerd gebruikt worden.. Oftewel, klonen zit eraan te komen.
Angst voor nieuwe technologie is altijd hetzelfdequote:Op dinsdag 18 december 2012 17:21 schreef Bonque54 het volgende:
Het is al bijna mogelijk om nieren en zelfs een hart te printen. Progressie is goed, maar dit kan totaal verkeerd gebruikt worden.. Oftewel, klonen zit eraan te komen.
Forum Opties | |
---|---|
Forumhop: | |
Hop naar: |