[Linux/Unix] [/Gurus/helpen/newbies]$ ./deel 31

man rpm en rpmbuild doen? Geen idee verder, ben ook een .debber.

quote:

Op dinsdag 17 augustus 2010 11:41 schreef ex het volgende:
Hoi!

Ik heb even een Centos/Fedora/RHL guru nodig want ik ben een te grote debian nerd om hier achter te komen:

Ik ben een custom kernel aan het bouwen omdat ik SCTP support mis voor Bri support. Nou werkt dit prima op de standaard make, make modules make modules_install make install manier. Hij doet het dus ook prima, m'n nieuwe kernel..

Maarrr, ik heb niet zo veel ervaring met Cent-OS specifieke dingen zoals RPM's en ik las dus, dat ik met make rpm een pakket zou moeten kunnen bouwen, die ik dan op andere systemen kan gebruiken. Nou vind ik dat wel handig want ik moet nog 20 bakken op deze manier tweaken.. Ik kan natuurlijk /boot en /usr/src/linux meenemen maar een rpm'tje is toch net ff netter.. Is er toevallig iemand anders die dit toevallig herkent?

De foutmelding:
[ code verwijderd ]

Lijkt simpel op te lossen.

quote:

Op maandag 16 augustus 2010 20:48 schreef Joooo-pi het volgende:
Ik ga em ook niet meer installeren vandaag. Ik heb nu wel de startup usb klaarliggen, maar dat duurde wat lang ivm een bug:
https://bugs.launchpad.net/ubuntu/+source/syslinux/+bug/608382

Later deze week weer verder

de fix voor de bug was "ui" weghalen uit een configfile op de usb stick, maar nu krijg ik:
"unknown keyword in configuration file: gfxboot "

Schijnt te maken te hebben met de usb creator van 10.04 icm nieuwe syslinux
(btw. ook geprobeerd om vanuit windows de opstart usb te maken, maar zelfde probleem)

Nog geen duidelijke fix gevonden daarvoor. Ga ook geen cd branden met een beta erop. Misschien deze week op het werk een maverick in virtualbox draaien en misschien kan ik vandaaruit wel een goeie opstart usb maken. Dat schijnt namelijk wel goed te gaan...

[ Bericht 1% gewijzigd door Joooo-pi op 17-08-2010 22:47:48 ]

Die fix heeft voor mij wel gewerkt, getuige het feit dat ik hier nu post.

-edit- Er gaat iets goed mis met de alpha-tranparency in de panels enzo...

-edit2- altijd leuk zo'n alpha. Installeer de updates en je systeem start niet meer op omdat het grafische stuurprogramma in de soep loopt ;D
Gelukkig bestaat er recovery mode enzo...

[ Bericht 37% gewijzigd door KomtTijd... op 17-08-2010 22:28:55 ]

quote:

Op dinsdag 17 augustus 2010 19:40 schreef trancethrust het volgende:

[..]

Lijkt simpel op te lossen.

haha held, hij is aan het builden. een l2google is hier wel op z'n plaats ja.. kut centos ook.

Bluh, ik kan niet meer middelklikken met twee vingers op mijn touchpad!

Scrollen werkt wel, al moest ik wel ineens zelf bij mouse preferences "two finger scroll" aanvinken, dat hoefde eerder nooit.

-edit-
ohwacht 2-vinger klik is nu rechtermuis, 3-vinger klik is middelmuis. Daar moet wel wat aan te doen zijn...
-edit2-
kanwel maar dan doet de rechtermuisknop onder het touchpad ook ineens middelklik.

[ Bericht 17% gewijzigd door KomtTijd... op 18-08-2010 14:17:39 ]

quote:

Op woensdag 18 augustus 2010 13:36 schreef KomtTijd... het volgende:
Bluh, ik kan niet meer middelklikken met twee vingers op mijn touchpad!

Scrollen werkt wel, al moest ik wel ineens zelf bij mouse preferences "two finger scroll" aanvinken, dat hoefde eerder nooit.

-edit-
ohwacht 2-vinger klik is nu rechtermuis, 3-vinger klik is middelmuis. Daar moet wel wat aan te doen zijn...
-edit2-
kanwel maar dan doet de rechtermuisknop onder het touchpad ook ineens middelklik.

Dat blijft lastig, en dat moeten ze echt eens oplossen. Tripleclick is lastig als je mannenhanden hebt. Op een of andere manier is de linkerknop van het touchpad altijd gelijk aan tappen op het pad. Mij is het sinds ik bij 9.04 met Linux begonnen ben nog niet gelukt.

Onder 9.10 en 10.04 had ik gewoon linker en rechtermuisknop op de knoppen onder het pad, en was 1-vinger tappen links, 2-vinger tappen middel en 3-vinger tappen rechts.
Nu zijn 2- en 3-vinger tappen dus omgewisseld qua functie. Best irritant want ik gebruik middelklikken veel vaker, en 3-vinger tappen is inderdaad best lastig soms.


-edit-
Voordeel is wel dat je niet het risico loopt op allerlei onbedoelde paste-acties als je door een lang document heen scrollt.

10.10 krijgt multitouch.

Maar dat is wat anders volgens mij

Goed ik zit hier weer met een probleem waar ik echt niet meer uit kom.

Ik wil vanaf mijn pc beeld en geluid naar mijn surround sound set sturen. Beeld komt wel binnen op de tv, maar met het geluid gebeurt niets.

Ik gebruik de on-board geluidskaart op het moederbord, een VIA VT1708S. De interne s/pdif interface hiervoor is doorgelust naar de videokaart waarna het geluid met het hdmi signaal meegestuurd zou moeten worden. Dit heeft voorheen gewoon gewerkt, maar sinds ik de surround sound set heb komt er geen geluid meer uit, ook niet als ik hem direct op de tv aansluit, dus het lijkt me niet dat het aan de surround sound set ligt. Daarnaast doet de Xbox 360 het via hdmi wel goed.

Als ik aplay-l uitvoer krijg ik de volgende output:
Mijn vermoeden is dat ik ergens moet zien in te stellen dat hij gebruik gaat maken van de digitale output, maar ik heb echt geen idee hoe ik dit voor elkaar moet krijgen, of hoe ik dit eerst voor elkaar gekregen heb. Is er een linux guru die mij even verder kan helpen hiermee?

Edit:

Oh ja, het OS is Ubuntu 9.04 met Alsa 1.0.23 compiled vanuit source met hda-intel support.

[ Bericht 2% gewijzigd door Daeron op 19-08-2010 23:38:23 ]

Console: alsamixer? Of anders gewoon via rechtermuis op de volumeknop (gnome) naar preferences, en daar digitaal selecteren (tenminste, dat werkt onder Fedora 13).

quote:

Op vrijdag 20 augustus 2010 00:12 schreef trancethrust het volgende:
Console: alsamixer? Of anders gewoon via rechtermuis op de volumeknop (gnome) naar preferences, en daar digitaal selecteren (tenminste, dat werkt onder Fedora 13).

Dat was het eerste waar ik zelf keek, daar staat alles aan en vol open.

w00t, video & voice chat doet het nu ook in Linux (Google Talk in je Gmail)
http://www.google.com/chat/video

quote:

Op dinsdag 17 augustus 2010 21:32 schreef KomtTijd... het volgende:
Die fix heeft voor mij wel gewerkt, getuige het feit dat ik hier nu post.

-edit- Er gaat iets goed mis met de alpha-tranparency in de panels enzo...

-edit2- altijd leuk zo'n alpha. Installeer de updates en je systeem start niet meer op omdat het grafische stuurprogramma in de soep loopt ;D
Gelukkig bestaat er recovery mode enzo...

Nadat ik een nieuwe opstart USB stick had gemaakt en de fix had toegepast, kon ik eindelijk booten van de USB stick, maar w00tt!! weer een error (bug) nl. deze:

http://ubuntuforums.org/showthread.php?t=1443231

De fix daarvoor is in het bootmenu F6 (voor extra opties) dan kun je de bootopdracht aanpassen. Daaruit "quiet nosplash" verwijderen.

Toen nog last van I/O error fd0 --> Floppy Drive gedisabled in de BIOS.

Toen kon ik eindelijk installeren. Na een succesvolle installatie van Maverick, draaide alles goed behalve mijn schermresulotie. Altijd gek#t met die nVidia . Proprietary driver geinstalleerd, reboot en zitten klooien met xorg.conf, maar nog geen succes. Ondertussen apt-get upgrade gedraaid en gereboot , met als gevolg dat ie blijft hangen in het bootproces. Ik kan nu wel met enige moeite de "recovery optie" in grub doen en in de CLI komen.

Maverick alpha leek dus eerst veelbelovend, maar nu toch weer gedoe. Nu kijken wat er aan te doen is

(hopelijk heeft iemand iets aan de fixes die ik gevonden heb)

Ik heb weer beeld

nVidia driver uitgeschakeld, dus low-res (1024x768) zonder effects

Dit is toch het newby topic? Ik schrik eerlijk gezegd toch van de vragen die hier gesteld worden, dacht even dat ik toch op Tweakers terecht gekomen was

Maar ik probeer het toch. Ik heb laatst Ubuntu geïnstalleerd op een oude pc (P4 2,5 Ghz, 512 MB Ram). Ik ben diep onder de indruk alles loopt lekker snel. Maar.... hij loopt veel te vaak vast. Ik krijg dan eerst een foutmelding (iets van ' starting common Unix printer system' en 'checking battery state' . Vervolgens gaat het beeldscherm flikkeren met zwartwitte strepen.

Iemand een idee? Ik zat zelf te denken an de videokaart, maar ik heb geen idee wat voor een kaart dat is (geen speciale). Ik heb system-administration-hardwaredrivers de klikt en dan gaat hij zoeken, maar geeft alleen aan dat er geen proprietory drivers geïntalleerd staan.

Kees

Je kan bekijken welke hardware er in je systeem aangesloten is door lspci uit te voeren. Dat levert een lijst op van alle apparatuur die op de pci bus aangesloten is. Voor usb apparatuur heb je lsusb.

Kijk ook eens wat in je syslog staat, deze vind je in /var/log.

Oh ja, aangaande mijn probleem een paar posts terug, ik denk dat het een defect is en heb dus nu een rma aanvraag ingediend.

quote:

Op zaterdag 21 augustus 2010 15:59 schreef Daeron het volgende:
Je kan bekijken welke hardware er in je systeem aangesloten is door lspci uit te voeren. Dat levert een lijst op van alle apparatuur die op de pci bus aangesloten is. Voor usb apparatuur heb je lsusb.

Kijk ook eens wat in je syslog staat, deze vind je in /var/log.

Oh ja, aangaande mijn probleem een paar posts terug, ik denk dat het een defect is en heb dus nu een rma aanvraag ingediend.

Hoho ik ben newby! (en niet een al te slimme). Hoe voer ik lspci uit? en waar vind ik /var/log?



Kees

EDIT: Ok, lspci gewoon in de terminal, ik krijg dan dit:

kees@kees-desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
05:04.0 Communication controller: 3Com Corp, Modem Division WinModem
05:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller (rev 81)
kees@kees-desktop:~$

De tweede zal de grafische kaart zijn? Zou ik daar e andere driver voor moeten installeren?

Kees

[ Bericht 44% gewijzigd door Casey op 21-08-2010 16:23:06 ]

Lspci voer je uit in de terminal.

En /var/log is een map, in die map worden alle logbestanden weggeschreven.. Er zitten wel bestanden tussen die alleen te lezen zijn als root (met sudo).

quote:

Op zaterdag 21 augustus 2010 16:22 schreef Daeron het volgende:
Lspci voer je uit in de terminal.

Ok, gevonden, boven heb ik het resultaat geplaatst. Kun je daar wat mee?

quote:

En /var/log is een map, in die map worden alle logbestanden weggeschreven.. Er zitten wel bestanden tussen die alleen te lezen zijn als root (met sudo).

De map heb ik gevonden maar daar staan weer heel veel andere mappen en andere files in, waar ben ik naar op zoek?

Bedankt voor je hulp trouwens

Kees

Even een user log open genmaakt, dit is het log van de afgelopen twee dagen:
Aug 20 07:37:51 kees-desktop pulseaudio[1139]: pid.c: Daemon already running.
Aug 20 07:37:55 kees-desktop pulseaudio[1026]: ratelimit.c: 4 events suppressed
Aug 20 18:52:57 kees-desktop pulseaudio[1143]: pid.c: Daemon already running.
Aug 20 18:53:04 kees-desktop pulseaudio[1026]: ratelimit.c: 7 events suppressed
Aug 20 19:07:35 kees-desktop os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda2
Aug 20 19:07:35 kees-desktop 50mounted-tests: debug: /dev/sda2 type not recognised; skipping
Aug 20 19:07:35 kees-desktop os-prober: debug: os detected by /usr/lib/os-probes/50mounted-tests
Aug 20 19:07:35 kees-desktop os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda5
Aug 20 19:07:35 kees-desktop 50mounted-tests: debug: /dev/sda5 is a swap partition; skipping
Aug 20 19:07:35 kees-desktop os-prober: debug: os detected by /usr/lib/os-probes/50mounted-tests
Aug 20 19:10:28 kees-desktop os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda2
Aug 20 19:10:28 kees-desktop 50mounted-tests: debug: /dev/sda2 type not recognised; skipping
Aug 20 19:10:28 kees-desktop os-prober: debug: os detected by /usr/lib/os-probes/50mounted-tests
Aug 20 19:10:28 kees-desktop os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda5
Aug 20 19:10:28 kees-desktop 50mounted-tests: debug: /dev/sda5 is a swap partition; skipping
Aug 20 19:10:28 kees-desktop os-prober: debug: os detected by /usr/lib/os-probes/50mounted-tests
Aug 20 19:15:05 kees-desktop pulseaudio[1152]: pid.c: Daemon already running.
Aug 20 19:15:09 kees-desktop pulseaudio[1078]: ratelimit.c: 2 events suppressed
Aug 20 19:44:19 kees-desktop python: io/hpmud/pp.c 627: unable to read device-id ret=-1
Aug 20 19:59:10 kees-desktop pulseaudio[1078]: ratelimit.c: 2 events suppressed
Aug 20 20:12:49 kees-desktop python: io/hpmud/pp.c 627: unable to read device-id ret=-1
Aug 20 20:16:20 kees-desktop pulseaudio[1161]: pid.c: Daemon already running.
Aug 20 20:16:24 kees-desktop pulseaudio[1090]: ratelimit.c: 4 events suppressed
Aug 20 23:16:59 kees-desktop pulseaudio[1153]: pid.c: Daemon already running.
Aug 20 23:56:01 kees-desktop pulseaudio[1167]: pid.c: Daemon already running.
Aug 20 23:56:06 kees-desktop pulseaudio[1052]: ratelimit.c: 2 events suppressed
Aug 20 23:57:34 kees-desktop python: io/hpmud/pp.c 627: unable to read device-id ret=-1
Aug 21 06:55:54 kees-desktop pulseaudio[1163]: pid.c: Daemon already running.
Aug 21 06:55:59 kees-desktop pulseaudio[1047]: ratelimit.c: 5 events suppressed
Aug 21 07:22:21 kees-desktop pulseaudio[1047]: ratelimit.c: 2 events suppressed
Aug 21 08:40:21 kees-desktop pulseaudio[1119]: pid.c: Daemon already running.
Aug 21 08:40:26 kees-desktop pulseaudio[1047]: ratelimit.c: 5 events suppressed

Ik denk dat we meer hebben aan de syslog.

Mini spoed cursus.

log /var/log/syslog geeft systeem meldingen.

/var/log/Xorg.0.log
is de log voor je display

tail -25 Xorg.0.log toont de laatste 25 regels van die log

Met grep kun je zoeken.
Dus
grep error Xorg.0.log

geeft alle regels met error in die log (maar niet elke keer is het woordje error een error )


Tijdens booten krijg je dan niet toevallig iets te zien over de display?

Oeps die si een beetje lang. Hij liep net weer vast trouwens, dus weer opnieuw pgestart. Het laatste deel van de syslog:

Aug 21 06:55:48 kees-desktop kernel: [ 0.088001] bio: create slab <bio-0> at 0
Aug 21 06:55:48 kees-desktop kernel: [ 0.088001] ACPI: EC: Look up EC in DSDT
Aug 21 06:55:48 kees-desktop kernel: [ 0.089862] ACPI: Interpreter enabled
Aug 21 06:55:48 kees-desktop kernel: [ 0.089874] ACPI: (supports S0 S1 S3 S4 S5)
Aug 21 06:55:48 kees-desktop kernel: [ 0.089903] ACPI: Using IOAPIC for interrupt routing
Aug 21 06:55:48 kees-desktop kernel: [ 0.093915] ACPI: No dock devices found.
Aug 21 06:55:48 kees-desktop kernel: [ 0.094070] ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 21 06:55:48 kees-desktop kernel: [ 0.094136] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094219] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094227] pci 0000:00:02.0: reg 14 32bit mmio: [0xfc400000-0xfc47ffff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094344] pci 0000:00:1d.0: reg 20 io port: [0x2440-0x245f]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094404] pci 0000:00:1d.1: reg 20 io port: [0x2460-0x247f]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094475] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc480000-0xfc4803ff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094537] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Aug 21 06:55:48 kees-desktop kernel: [ 0.094543] pci 0000:00:1d.7: PME# disabled
Aug 21 06:55:48 kees-desktop kernel: [ 0.094599] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
Aug 21 06:55:48 kees-desktop kernel: [ 0.094601] * this clock source is slow. If you are sure your timer does not have
Aug 21 06:55:48 kees-desktop kernel: [ 0.094603] * this bug, please use "acpi_pm_good" to disable the workaround
Aug 21 06:55:48 kees-desktop kernel: [ 0.094650] pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
Aug 21 06:55:48 kees-desktop kernel: [ 0.094655] pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH4 GPIO
Aug 21 06:55:48 kees-desktop kernel: [ 0.094684] pci 0000:00:1f.1: reg 10 io port: [0x24b0-0x24b7]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094692] pci 0000:00:1f.1: reg 14 io port: [0x24c0-0x24c3]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094700] pci 0000:00:1f.1: reg 18 io port: [0x24b8-0x24bf]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094708] pci 0000:00:1f.1: reg 1c io port: [0x24c4-0x24c7]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094716] pci 0000:00:1f.1: reg 20 io port: [0x24a0-0x24af]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094725] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094775] pci 0000:00:1f.5: reg 10 io port: [0x2000-0x20ff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094782] pci 0000:00:1f.5: reg 14 io port: [0x2400-0x243f]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094790] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfc480400-0xfc4805ff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094798] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfc480600-0xfc4806ff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094831] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
Aug 21 06:55:48 kees-desktop kernel: [ 0.094836] pci 0000:00:1f.5: PME# disabled
Aug 21 06:55:48 kees-desktop kernel: [ 0.094888] pci 0000:05:04.0: reg 10 32bit mmio pref: [0xfc518000-0xfc51803f]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094896] pci 0000:05:04.0: reg 14 32bit mmio pref: [0xfc500000-0xfc50ffff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094904] pci 0000:05:04.0: reg 18 32bit mmio pref: [0xfc510000-0xfc517fff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094941] pci 0000:05:04.0: supports D2
Aug 21 06:55:48 kees-desktop kernel: [ 0.094944] pci 0000:05:04.0: PME# supported from D0 D2 D3hot D3cold
Aug 21 06:55:48 kees-desktop kernel: [ 0.094949] pci 0000:05:04.0: PME# disabled
Aug 21 06:55:48 kees-desktop kernel: [ 0.094988] pci 0000:05:08.0: reg 10 32bit mmio: [0xfca00000-0xfca00fff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.094996] pci 0000:05:08.0: reg 14 io port: [0x1000-0x103f]
Aug 21 06:55:48 kees-desktop kernel: [ 0.095037] pci 0000:05:08.0: supports D1 D2
Aug 21 06:55:48 kees-desktop kernel: [ 0.095041] pci 0000:05:08.0: PME# supported from D0 D1 D2 D3hot D3cold
Aug 21 06:55:48 kees-desktop kernel: [ 0.095046] pci 0000:05:08.0: PME# disabled
Aug 21 06:55:48 kees-desktop kernel: [ 0.095081] pci 0000:00:1e.0: transparent bridge
Aug 21 06:55:48 kees-desktop kernel: [ 0.095087] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.095092] pci 0000:00:1e.0: bridge 32bit mmio: [0xfc800000-0xfcafffff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.095098] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xfc500000-0xfc7fffff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.095109] pci_bus 0000:00: on NUMA node 0
Aug 21 06:55:48 kees-desktop kernel: [ 0.095116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Aug 21 06:55:48 kees-desktop kernel: [ 0.095272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
Aug 21 06:55:48 kees-desktop kernel: [ 0.099363] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
Aug 21 06:55:48 kees-desktop kernel: [ 0.099462] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
Aug 21 06:55:48 kees-desktop kernel: [ 0.099558] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Aug 21 06:55:48 kees-desktop kernel: [ 0.099655] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
Aug 21 06:55:48 kees-desktop kernel: [ 0.099751] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
Aug 21 06:55:48 kees-desktop kernel: [ 0.099846] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Aug 21 06:55:48 kees-desktop kernel: [ 0.099943] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Aug 21 06:55:48 kees-desktop kernel: [ 0.100059] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
Aug 21 06:55:48 kees-desktop kernel: [ 0.100214] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Aug 21 06:55:48 kees-desktop kernel: [ 0.100223] vgaarb: loaded
Aug 21 06:55:48 kees-desktop kernel: [ 0.100421] SCSI subsystem initialized
Aug 21 06:55:48 kees-desktop kernel: [ 0.100537] libata version 3.00 loaded.
Aug 21 06:55:48 kees-desktop kernel: [ 0.100645] usbcore: registered new interface driver usbfs
Aug 21 06:55:48 kees-desktop kernel: [ 0.100664] usbcore: registered new interface driver hub
Aug 21 06:55:48 kees-desktop kernel: [ 0.100708] usbcore: registered new device driver usb
Aug 21 06:55:48 kees-desktop kernel: [ 0.100898] ACPI: WMI: Mapper loaded
Aug 21 06:55:48 kees-desktop kernel: [ 0.100902] PCI: Using ACPI for IRQ routing
Aug 21 06:55:48 kees-desktop kernel: [ 0.101230] NetLabel: Initializing
Aug 21 06:55:48 kees-desktop kernel: [ 0.101233] NetLabel: domain hash size = 128
Aug 21 06:55:48 kees-desktop kernel: [ 0.101235] NetLabel: protocols = UNLABELED CIPSOv4
Aug 21 06:55:48 kees-desktop kernel: [ 0.101253] NetLabel: unlabeled traffic allowed by default
Aug 21 06:55:48 kees-desktop kernel: [ 0.101319] Switching to clocksource tsc
Aug 21 06:55:48 kees-desktop kernel: [ 0.104001] AppArmor: AppArmor Filesystem Enabled
Aug 21 06:55:48 kees-desktop kernel: [ 0.104001] pnp: PnP ACPI init
Aug 21 06:55:48 kees-desktop kernel: [ 0.104001] ACPI: bus type pnp registered
Aug 21 06:55:48 kees-desktop kernel: [ 0.105153] pnp 00:0c: io resource (0xf800-0xf81f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
Aug 21 06:55:48 kees-desktop kernel: [ 0.105159] pnp 00:0c: io resource (0xf820-0xf83f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
Aug 21 06:55:48 kees-desktop kernel: [ 0.105163] pnp 00:0c: io resource (0xf840-0xf85f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
Aug 21 06:55:48 kees-desktop kernel: [ 0.105168] pnp 00:0c: io resource (0xf860-0xf87f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
Aug 21 06:55:48 kees-desktop kernel: [ 0.105649] pnp: PnP ACPI: found 14 devices
Aug 21 06:55:48 kees-desktop kernel: [ 0.105653] ACPI: ACPI bus type pnp unregistered
Aug 21 06:55:48 kees-desktop kernel: [ 0.105660] PnPBIOS: Disabled by ACPI PNP
Aug 21 06:55:48 kees-desktop kernel: [ 0.105682] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105692] system 00:0c: ioport range 0x400-0x41f has been reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105697] system 00:0c: ioport range 0x420-0x43f has been reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105701] system 00:0c: ioport range 0x440-0x45f has been reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105705] system 00:0c: ioport range 0x460-0x47f has been reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105710] system 00:0c: ioport range 0xfa00-0xfa3f has been reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105714] system 00:0c: ioport range 0xfc00-0xfc7f has been reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105718] system 00:0c: ioport range 0xfc80-0xfcff has been reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105722] system 00:0c: ioport range 0xfe00-0xfe7f has been reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105726] system 00:0c: ioport range 0xfe80-0xfeff has been reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105735] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105741] system 00:0d: iomem range 0x100000-0x1f7fffff could not be reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105746] system 00:0d: iomem range 0x1f800000-0x1f8fffff could not be reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105750] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105754] system 00:0d: iomem range 0xfec01000-0xffffffff has been reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.105758] system 00:0d: iomem range 0xcc400-0xdffff has been reserved
Aug 21 06:55:48 kees-desktop kernel: [ 0.140606] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
Aug 21 06:55:48 kees-desktop kernel: [ 0.140612] pci 0000:00:1e.0: IO window: 0x1000-0x1fff
Aug 21 06:55:48 kees-desktop kernel: [ 0.140619] pci 0000:00:1e.0: MEM window: 0xfc800000-0xfcafffff
Aug 21 06:55:48 kees-desktop kernel: [ 0.140625] pci 0000:00:1e.0: PREFETCH window: 0xfc500000-0xfc7fffff
Aug 21 06:55:48 kees-desktop kernel: [ 0.140644] pci 0000:00:1e.0: setting latency timer to 64
Aug 21 06:55:48 kees-desktop kernel: [ 0.140651] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.140654] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.140658] pci_bus 0000:05: resource 0 io: [0x1000-0x1fff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.140661] pci_bus 0000:05: resource 1 mem: [0xfc800000-0xfcafffff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.140665] pci_bus 0000:05: resource 2 pref mem [0xfc500000-0xfc7fffff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.140669] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.140672] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
Aug 21 06:55:48 kees-desktop kernel: [ 0.140728] NET: Registered protocol family 2
Aug 21 06:55:48 kees-desktop kernel: [ 0.140875] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Aug 21 06:55:48 kees-desktop kernel: [ 0.141302] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Aug 21 06:55:48 kees-desktop kernel: [ 0.141427] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
Aug 21 06:55:48 kees-desktop kernel: [ 0.141550] TCP: Hash tables configured (established 16384 bind 16384)
Aug 21 06:55:48 kees-desktop kernel: [ 0.141553] TCP reno registered
Aug 21 06:55:48 kees-desktop kernel: [ 0.141664] NET: Registered protocol family 1
Aug 21 06:55:48 kees-desktop kernel: [ 0.141694] pci 0000:00:02.0: Boot video device
Aug 21 06:55:48 kees-desktop kernel: [ 0.141784] pci 0000:05:08.0: Firmware left e100 interrupts enabled; disabling
Aug 21 06:55:48 kees-desktop kernel: [ 0.142091] cpufreq-nforce2: No nForce2 chipset.
Aug 21 06:55:48 kees-desktop kernel: [ 0.142134] Scanning for low memory corruption every 60 seconds
Aug 21 06:55:48 kees-desktop kernel: [ 0.142311] audit: initializing netlink socket (disabled)
Aug 21 06:55:48 kees-desktop kernel: [ 0.142332] type=2000 audit(1282373728.138:1): initialized
Aug 21 06:55:48 kees-desktop kernel: [ 0.152912] Trying to unpack rootfs image as initramfs...
Aug 21 06:55:48 kees-desktop kernel: [ 0.166729] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Aug 21 06:55:48 kees-desktop kernel: [ 0.168794] VFS: Disk quotas dquot_6.5.2
Aug 21 06:55:48 kees-desktop kernel: [ 0.168884] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug 21 06:55:48 kees-desktop kernel: [ 0.169774] fuse init (API version 7.13)
Aug 21 06:55:48 kees-desktop kernel: [ 0.169909] msgmni has been set to 962
Aug 21 06:55:48 kees-desktop kernel: [ 0.175197] alg: No test for stdrng (krng)
Aug 21 06:55:48 kees-desktop kernel: [ 0.175352] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Aug 21 06:55:48 kees-desktop kernel: [ 0.175357] io scheduler noop registered
Aug 21 06:55:48 kees-desktop kernel: [ 0.175360] io scheduler anticipatory registered
Aug 21 06:55:48 kees-desktop kernel: [ 0.175362] io scheduler deadline registered
Aug 21 06:55:48 kees-desktop kernel: [ 0.175426] io scheduler cfq registered (default)
Aug 21 06:55:48 kees-desktop kernel: [ 0.175578] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 21 06:55:48 kees-desktop kernel: [ 0.175613] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Aug 21 06:55:48 kees-desktop kernel: [ 0.175766] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Aug 21 06:55:48 kees-desktop kernel: [ 0.175780] ACPI: Power Button [PBTN]
Aug 21 06:55:48 kees-desktop kernel: [ 0.175852] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Aug 21 06:55:48 kees-desktop kernel: [ 0.175856] ACPI: Power Button [PWRF]
Aug 21 06:55:48 kees-desktop kernel: [ 0.176072] processor LNXCPU:00: registered as cooling_device0
Aug 21 06:55:48 kees-desktop kernel: [ 0.179811] isapnp: Scanning for PnP cards...
Aug 21 06:55:48 kees-desktop kernel: [ 0.191415] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Aug 21 06:55:48 kees-desktop kernel: [ 0.191541] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 21 06:55:48 kees-desktop kernel: [ 0.192053] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 21 06:55:48 kees-desktop kernel: [ 0.193593] brd: module loaded
Aug 21 06:55:48 kees-desktop kernel: [ 0.194275] loop: module loaded
Aug 21 06:55:48 kees-desktop kernel: [ 0.194426] input: Macintosh mouse button emulation as /devices/virtual/input/input2
Aug 21 06:55:48 kees-desktop kernel: [ 0.194604] ata_piix 0000:00:1f.1: version 2.13
Aug 21 06:55:48 kees-desktop kernel: [ 0.194669] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
Aug 21 06:55:48 kees-desktop kernel: [ 0.194684] alloc irq_desc for 18 on node -1
Aug 21 06:55:48 kees-desktop kernel: [ 0.194687] alloc kstat_irqs on node -1
Aug 21 06:55:48 kees-desktop kernel: [ 0.194699] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Aug 21 06:55:48 kees-desktop kernel: [ 0.194791] ata_piix 0000:00:1f.1: setting latency timer to 64
Aug 21 06:55:48 kees-desktop kernel: [ 0.238536] scsi0 : ata_piix
Aug 21 06:55:48 kees-desktop kernel: [ 0.242806] scsi1 : ata_piix
Aug 21 06:55:48 kees-desktop kernel: [ 0.243158] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x24a0 irq 14
Aug 21 06:55:48 kees-desktop kernel: [ 0.243163] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x24a8 irq 15
Aug 21 06:55:48 kees-desktop kernel: [ 0.243768] Fixed MDIO Bus: probed
Aug 21 06:55:48 kees-desktop kernel: [ 0.243826] PPP generic driver version 2.4.2
Aug 21 06:55:48 kees-desktop kernel: [ 0.243942] tun: Universal TUN/TAP device driver, 1.6
Aug 21 06:55:48 kees-desktop kernel: [ 0.243945] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Aug 21 06:55:48 kees-desktop kernel: [ 0.244097] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 21 06:55:48 kees-desktop kernel: [ 0.244138] alloc irq_desc for 23 on node -1
Aug 21 06:55:48 kees-desktop kernel: [ 0.244142] alloc kstat_irqs on node -1
Aug 21 06:55:48 kees-desktop kernel: [ 0.244155] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Aug 21 06:55:48 kees-desktop kernel: [ 0.244178] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Aug 21 06:55:48 kees-desktop kernel: [ 0.244183] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Aug 21 06:55:48 kees-desktop kernel: [ 0.244230] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Aug 21 06:55:48 kees-desktop kernel: [ 0.244280] ehci_hcd 0000:00:1d.7: debug port 1
Aug 21 06:55:48 kees-desktop kernel: [ 0.248168] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
Aug 21 06:55:48 kees-desktop kernel: [ 0.250759] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc480000
Aug 21 06:55:48 kees-desktop kernel: [ 0.271007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Aug 21 06:55:48 kees-desktop kernel: [ 0.271249] usb usb1: configuration #1 chosen from 1 choice
Aug 21 06:55:48 kees-desktop kernel: [ 0.271297] hub 1-0:1.0: USB hub found
Aug 21 06:55:48 kees-desktop kernel: [ 0.271325] hub 1-0:1.0: 6 ports detected
Aug 21 06:55:48 kees-desktop kernel: [ 0.271426] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 21 06:55:48 kees-desktop kernel: [ 0.271450] uhci_hcd: USB Universal Host Controller Interface driver
Aug 21 06:55:48 kees-desktop kernel: [ 0.271535] alloc irq_desc for 16 on node -1
Aug 21 06:55:48 kees-desktop kernel: [ 0.271539] alloc kstat_irqs on node -1
Aug 21 06:55:48 kees-desktop kernel: [ 0.271551] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug 21 06:55:48 kees-desktop kernel: [ 0.271565] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Aug 21 06:55:48 kees-desktop kernel: [ 0.271570] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Aug 21 06:55:48 kees-desktop kernel: [ 0.271632] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Aug 21 06:55:48 kees-desktop kernel: [ 0.271675] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002440
Aug 21 06:55:48 kees-desktop kernel: [ 0.271815] usb usb2: configuration #1 chosen from 1 choice
Aug 21 06:55:48 kees-desktop kernel: [ 0.271855] hub 2-0:1.0: USB hub found
Aug 21 06:55:48 kees-desktop kernel: [ 0.271867] hub 2-0:1.0: 2 ports detected
Aug 21 06:55:48 kees-desktop kernel: [ 0.271927] alloc irq_desc for 19 on node -1
Aug 21 06:55:48 kees-desktop kernel: [ 0.271930] alloc kstat_irqs on node -1
Aug 21 06:55:48 kees-desktop kernel: [ 0.271936] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Aug 21 06:55:48 kees-desktop kernel: [ 0.271944] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Aug 21 06:55:48 kees-desktop kernel: [ 0.271948] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Aug 21 06:55:48 kees-desktop kernel: [ 0.272019] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Aug 21 06:55:48 kees-desktop kernel: [ 0.272054] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002460
Aug 21 06:55:48 kees-desktop kernel: [ 0.272187] usb usb3: configuration #1 chosen from 1 choice
Aug 21 06:55:48 kees-desktop kernel: [ 0.272225] hub 3-0:1.0: USB hub found
Aug 21 06:55:48 kees-desktop kernel: [ 0.272238] hub 3-0:1.0: 2 ports detected
Aug 21 06:55:48 kees-desktop kernel: [ 0.272379] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
Aug 21 06:55:48 kees-desktop kernel: [ 0.279789] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 21 06:55:48 kees-desktop kernel: [ 0.279810] serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 21 06:55:48 kees-desktop kernel: [ 0.280092] mice: PS/2 mouse device common for all mice
Aug 21 06:55:48 kees-desktop kernel: [ 0.280284] rtc_cmos 00:03: RTC can wake from S4
Aug 21 06:55:48 kees-desktop kernel: [ 0.280356] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Aug 21 06:55:48 kees-desktop kernel: [ 0.280385] rtc0: alarms up to one month, y3k, 114 bytes nvram
Aug 21 06:55:48 kees-desktop kernel: [ 0.280580] device-mapper: uevent: version 1.0.3
Aug 21 06:55:48 kees-desktop kernel: [ 0.280773] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Aug 21 06:55:48 kees-desktop kernel: [ 0.280852] device-mapper: multipath: version 1.1.0 loaded
Aug 21 06:55:48 kees-desktop kernel: [ 0.280857] device-mapper: multipath round-robin: version 1.0.0 loaded
Aug 21 06:55:48 kees-desktop kernel: [ 0.283171] EISA: Probing bus 0 at eisa.0
Aug 21 06:55:48 kees-desktop kernel: [ 0.283185] Cannot allocate resource for EISA slot 1
Aug 21 06:55:48 kees-desktop kernel: [ 0.283188] Cannot allocate resource for EISA slot 2
Aug 21 06:55:48 kees-desktop kernel: [ 0.283236] EISA: Detected 0 cards.
Aug 21 06:55:48 kees-desktop kernel: [ 0.284442] cpuidle: using governor ladder
Aug 21 06:55:48 kees-desktop kernel: [ 0.284447] cpuidle: using governor menu
Aug 21 06:55:48 kees-desktop kernel: [ 0.285108] TCP cubic registered
Aug 21 06:55:48 kees-desktop kernel: [ 0.285289] NET: Registered protocol family 10
Aug 21 06:55:48 kees-desktop kernel: [ 0.286032] lo: Disabled Privacy Extensions
Aug 21 06:55:48 kees-desktop kernel: [ 0.286502] NET: Registered protocol family 17
Aug 21 06:55:48 kees-desktop kernel: [ 0.286609] Using IPI No-Shortcut mode
Aug 21 06:55:48 kees-desktop kernel: [ 0.286808] PM: Resume from disk failed.
Aug 21 06:55:48 kees-desktop kernel: [ 0.286827] registered taskstats version 1
Aug 21 06:55:48 kees-desktop kernel: [ 0.287074] Magic number: 6:116:924
Aug 21 06:55:48 kees-desktop kernel: [ 0.287173] rtc_cmos 00:03: setting system clock to 2010-08-21 06:55:29 UTC (1282373729)
Aug 21 06:55:48 kees-desktop kernel: [ 0.287178] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Aug 21 06:55:48 kees-desktop kernel: [ 0.287181] EDD information not available.
Aug 21 06:55:48 kees-desktop kernel: [ 0.344892] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Aug 21 06:55:48 kees-desktop kernel: [ 0.444513] ata1.00: ATA-5: WDC WD400EB-11CPF0, 06.04G06, max UDMA/100
Aug 21 06:55:48 kees-desktop kernel: [ 0.444520] ata1.00: 78165360 sectors, multi 16: LBA
Aug 21 06:55:48 kees-desktop kernel: [ 0.460380] ata1.00: configured for UDMA/100
Aug 21 06:55:48 kees-desktop kernel: [ 0.711087] ata2.00: ATAPI: HL-DT-ST CD-ROM GCR-8480B, 1.03, max MWDMA2
Aug 21 06:55:48 kees-desktop kernel: [ 0.711142] ata2.01: ATAPI: SONY CD-RW CRX220E1, 6YS1, max UDMA/33
Aug 21 06:55:48 kees-desktop kernel: [ 0.726956] ata2.00: configured for MWDMA2
Aug 21 06:55:48 kees-desktop kernel: [ 0.743436] ata2.01: configured for UDMA/33
Aug 21 06:55:48 kees-desktop kernel: [ 0.793467] Freeing initrd memory: 7778k freed
Aug 21 06:55:48 kees-desktop kernel: [ 0.853683] isapnp: No Plug & Play device found
Aug 21 06:55:48 kees-desktop kernel: [ 0.853729] usb 2-1: new low speed USB device using uhci_hcd and address 2
Aug 21 06:55:48 kees-desktop kernel: [ 0.854007] scsi 0:0:0:0: Direct-Access ATA WDC WD400EB-11CP 06.0 PQ: 0 ANSI: 5
Aug 21 06:55:48 kees-desktop kernel: [ 0.854315] sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 21 06:55:48 kees-desktop kernel: [ 0.854564] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
Aug 21 06:55:48 kees-desktop kernel: [ 0.854635] sd 0:0:0:0: [sda] Write Protect is off
Aug 21 06:55:48 kees-desktop kernel: [ 0.854639] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 21 06:55:48 kees-desktop kernel: [ 0.854674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 21 06:55:48 kees-desktop kernel: [ 0.854920] sda:
Aug 21 06:55:48 kees-desktop kernel: [ 0.855265] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8480B 1.03 PQ: 0 ANSI: 5
Aug 21 06:55:48 kees-desktop kernel: [ 0.859895] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Aug 21 06:55:48 kees-desktop kernel: [ 0.859901] Uniform CD-ROM driver Revision: 3.20
Aug 21 06:55:48 kees-desktop kernel: [ 0.860050] sr 1:0:0:0: Attached scsi CD-ROM sr0
Aug 21 06:55:48 kees-desktop kernel: [ 0.860152] sr 1:0:0:0: Attached scsi generic sg1 type 5
Aug 21 06:55:48 kees-desktop kernel: [ 0.864960] scsi 1:0:1:0: CD-ROM SONY CD-RW CRX220E1 6YS1 PQ: 0 ANSI: 5
Aug 21 06:55:48 kees-desktop kernel: [ 0.866586] sda1 sda2 < sda5 >
Aug 21 06:55:48 kees-desktop kernel: [ 0.894275] sd 0:0:0:0: [sda] Attached SCSI disk
Aug 21 06:55:48 kees-desktop kernel: [ 0.914874] sr1: scsi3-mmc drive: 121x/52x writer cd/rw xa/form2 cdda tray
Aug 21 06:55:48 kees-desktop kernel: [ 0.915000] sr 1:0:1:0: Attached scsi CD-ROM sr1
Aug 21 06:55:48 kees-desktop kernel: [ 0.915096] sr 1:0:1:0: Attached scsi generic sg2 type 5
Aug 21 06:55:48 kees-desktop kernel: [ 0.915163] Freeing unused kernel memory: 660k freed
Aug 21 06:55:48 kees-desktop kernel: [ 0.916250] Write protecting the kernel text: 4680k
Aug 21 06:55:48 kees-desktop kernel: [ 0.916287] Write protecting the kernel read-only data: 1844k
Aug 21 06:55:48 kees-desktop kernel: [ 0.949236] udev: starting version 151
Aug 21 06:55:48 kees-desktop kernel: [ 1.037870] usb 2-1: configuration #1 chosen from 1 choice
Aug 21 06:55:48 kees-desktop kernel: [ 1.263773] usbcore: registered new interface driver hiddev
Aug 21 06:55:48 kees-desktop kernel: [ 1.270286] Floppy drive(s): fd0 is 1.44M
Aug 21 06:55:48 kees-desktop kernel: [ 1.271233] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
Aug 21 06:55:48 kees-desktop kernel: [ 1.271238] e100: Copyright(c) 1999-2006 Intel Corporation
Aug 21 06:55:48 kees-desktop kernel: [ 1.271309] alloc irq_desc for 20 on node -1
Aug 21 06:55:48 kees-desktop kernel: [ 1.271313] alloc kstat_irqs on node -1
Aug 21 06:55:48 kees-desktop kernel: [ 1.271324] e100 0000:05:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Aug 21 06:55:48 kees-desktop kernel: [ 1.294130] e100 0000:05:08.0: PME# disabled
Aug 21 06:55:48 kees-desktop kernel: [ 1.294606] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
Aug 21 06:55:48 kees-desktop kernel: [ 1.294774] generic-usb 0003:045E:0053.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1/input0
Aug 21 06:55:48 kees-desktop kernel: [ 1.294817] usbcore: registered new interface driver usbhid
Aug 21 06:55:48 kees-desktop kernel: [ 1.294822] usbhid: v2.6:USB HID core driver
Aug 21 06:55:48 kees-desktop kernel: [ 1.298222] FDC 0 is a post-1991 82077
Aug 21 06:55:48 kees-desktop kernel: [ 1.320963] e100: eth0: e100_probe: addr 0xfca00000, irq 20, MAC addr 00:0c:76:05:54:a2
Aug 21 06:55:48 kees-desktop kernel: [ 1.524289] EXT4-fs (sda1): mounted filesystem with ordered data mode
Aug 21 06:55:48 kees-desktop kernel: [ 17.707049] Adding 1466360k swap on /dev/sda5. Priority:-1 extents:1 across:1466360k
Aug 21 06:55:48 kees-desktop kernel: [ 17.737653] udev: starting version 151
Aug 21 06:55:48 kees-desktop kernel: [ 17.973618] lp: driver loaded but no devices found
Aug 21 06:55:48 kees-desktop kernel: [ 18.073755] intel_rng: Firmware space is locked read-only. If you can't or
Aug 21 06:55:48 kees-desktop kernel: [ 18.073759] intel_rng: don't want to disable this in firmware setup, and if
Aug 21 06:55:48 kees-desktop kernel: [ 18.073761] intel_rng: you are certain that your system has a functional
Aug 21 06:55:48 kees-desktop kernel: [ 18.073762] intel_rng: RNG, try using the 'no_fwh_detect' option.
Aug 21 06:55:48 kees-desktop kernel: [ 18.074047] Linux agpgart interface v0.103
Aug 21 06:55:48 kees-desktop kernel: [ 18.135328] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug 21 06:55:48 kees-desktop kernel: [ 18.270504] agpgart-intel 0000:00:00.0: Intel 830M Chipset
Aug 21 06:55:48 kees-desktop kernel: [ 18.270718] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
Aug 21 06:55:48 kees-desktop kernel: [ 18.329402] parport_pc 00:07: reported by Plug and Play ACPI
Aug 21 06:55:48 kees-desktop kernel: [ 18.329459] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Aug 21 06:55:48 kees-desktop kernel: [ 18.340969] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
Aug 21 06:55:48 kees-desktop kernel: [ 18.432325] lp0: using parport0 (interrupt-driven).
Aug 21 06:55:48 kees-desktop kernel: [ 18.576770] ppdev: user-space parallel port driver
Aug 21 06:55:48 kees-desktop kernel: [ 18.579522] [drm] Initialized drm 1.1.0 20060810
Aug 21 06:55:48 kees-desktop kernel: [ 18.634596] type=1505 audit(1282391747.844:2): operation="profile_load" pid=474 name="/sbin/dhclient3"
Aug 21 06:55:48 kees-desktop kernel: [ 18.635253] type=1505 audit(1282391747.844:3): operation="profile_load" pid=474 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Aug 21 06:55:48 kees-desktop kernel: [ 18.635604] type=1505 audit(1282391747.844:4): operation="profile_load" pid=474 name="/usr/lib/connman/scripts/dhclient-script"
Aug 21 06:55:48 kees-desktop kernel: [ 18.797264] [drm] i915 disabling kernel modesetting for known bad device.
Aug 21 06:55:48 kees-desktop kernel: [ 18.797300] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug 21 06:55:48 kees-desktop kernel: [ 18.797307] pci 0000:00:02.0: setting latency timer to 64
Aug 21 06:55:48 kees-desktop kernel: [ 18.831591] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Aug 21 06:55:48 kees-desktop kernel: [ 18.849961] vga16fb: initializing
Aug 21 06:55:48 kees-desktop kernel: [ 18.849972] vga16fb: mapped to 0xc00a0000
Aug 21 06:55:48 kees-desktop kernel: [ 18.850285] fb0: VGA16 VGA frame buffer device
Aug 21 06:55:48 kees-desktop kernel: [ 19.151393] alloc irq_desc for 17 on node -1
Aug 21 06:55:48 kees-desktop kernel: [ 19.151397] alloc kstat_irqs on node -1
Aug 21 06:55:48 kees-desktop kernel: [ 19.151408] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Aug 21 06:55:48 kees-desktop kernel: [ 19.151452] Intel ICH 0000:00:1f.5: setting latency timer to 64
Aug 21 06:55:48 kees-desktop kernel: [ 19.156820] Console: switching to colour frame buffer device 80x30
Aug 21 06:55:48 kees-desktop NetworkManager: <info> starting...
Aug 21 06:55:48 kees-desktop avahi-daemon[604]: Found user 'avahi' (UID 104) and group 'avahi' (GID 111).
Aug 21 06:55:48 kees-desktop avahi-daemon[604]: Successfully dropped root privileges.
Aug 21 06:55:48 kees-desktop avahi-daemon[604]: avahi-daemon 0.6.25 starting up.
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Trying to start the modem-manager...
Aug 21 06:55:48 kees-desktop avahi-daemon[604]: Successfully called chroot().
Aug 21 06:55:48 kees-desktop avahi-daemon[604]: Successfully dropped remaining capabilities.
Aug 21 06:55:48 kees-desktop NetworkManager: SCPlugin-Ifupdown: init!
Aug 21 06:55:48 kees-desktop NetworkManager: SCPlugin-Ifupdown: update_system_hostname
Aug 21 06:55:48 kees-desktop NetworkManager: SCPluginIfupdown: management mode: unmanaged
Aug 21 06:55:48 kees-desktop NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:08.0/net/eth0, iface: eth0)
Aug 21 06:55:48 kees-desktop NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:08.0/net/eth0, iface: eth0): no ifupdown configuration found.
Aug 21 06:55:48 kees-desktop NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Aug 21 06:55:48 kees-desktop avahi-daemon[604]: No service file found in /etc/avahi/services.
Aug 21 06:55:48 kees-desktop NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Aug 21 06:55:48 kees-desktop NetworkManager: SCPlugin-Ifupdown: end _init.
Aug 21 06:55:48 kees-desktop NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list.
Aug 21 06:55:48 kees-desktop NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Aug 21 06:55:48 kees-desktop avahi-daemon[604]: Network interface enumeration completed.
Aug 21 06:55:48 kees-desktop avahi-daemon[604]: Registering HINFO record with values 'I686'/'LINUX'.
Aug 21 06:55:48 kees-desktop avahi-daemon[604]: Server startup complete. Host name is kees-desktop.local. Local service cookie is 4152981264.
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin ZTE
Aug 21 06:55:48 kees-desktop kernel: [ 19.385370] type=1505 audit(1282391748.596:5): operation="profile_load" pid=616 name="/usr/share/gdm/guest-session/Xsession"
Aug 21 06:55:48 kees-desktop NetworkManager: <info> WiFi enabled by radio killswitch; enabled by state file
Aug 21 06:55:48 kees-desktop NetworkManager: <info> WWAN enabled by radio killswitch; enabled by state file
Aug 21 06:55:48 kees-desktop NetworkManager: SCPlugin-Ifupdown: (144572144) ... get_connections.
Aug 21 06:55:48 kees-desktop NetworkManager: SCPlugin-Ifupdown: (144572144) ... get_connections (managed=false): return empty list.
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin Longcheer
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin Novatel
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin AnyData
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin Sierra
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin Gobi
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin Option
Aug 21 06:55:48 kees-desktop kernel: [ 19.409075] type=1505 audit(1282391748.620:6): operation="profile_replace" pid=617 name="/sbin/dhclient3"
Aug 21 06:55:48 kees-desktop kernel: [ 19.409767] type=1505 audit(1282391748.620:7): operation="profile_replace" pid=617 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Aug 21 06:55:48 kees-desktop kernel: [ 19.410141] type=1505 audit(1282391748.620:8): operation="profile_replace" pid=617 name="/usr/lib/connman/scripts/dhclient-script"
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin Nokia
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin Huawei
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin MotoC
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin Option High-Speed
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin Generic
Aug 21 06:55:48 kees-desktop modem-manager: Loaded plugin Ericsson MBM
Aug 21 06:55:48 kees-desktop kernel: [ 19.445264] type=1505 audit(1282391748.656:9): operation="profile_load" pid=618 name="/usr/bin/evince"
Aug 21 06:55:48 kees-desktop NetworkManager: Ifupdown: get unmanaged devices count: 0
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): carrier is OFF
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): new Ethernet device (driver: 'e100')
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): now managed
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): device state change: 1 -> 2 (reason 2)
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): bringing up device.
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): preparing device.
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): deactivating device (reason: 2).
Aug 21 06:55:48 kees-desktop NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1e.0/0000:05:08.0/net/eth0
Aug 21 06:55:48 kees-desktop kernel: [ 19.473088] ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 21 06:55:48 kees-desktop kernel: [ 19.476178] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
Aug 21 06:55:48 kees-desktop kernel: [ 19.476425] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): carrier now ON (device state 2)
Aug 21 06:55:48 kees-desktop kernel: [ 19.496299] type=1505 audit(1282391748.708:10): operation="profile_load" pid=618 name="/usr/bin/evince-previewer"
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): device state change: 2 -> 3 (reason 40)
Aug 21 06:55:48 kees-desktop NetworkManager: <WARN> default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Aug 21 06:55:48 kees-desktop NetworkManager: <info> modem-manager is now available
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Trying to start the supplicant...
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) starting connection 'Auto eth0'
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): device state change: 3 -> 4 (reason 0)
Aug 21 06:55:48 kees-desktop kernel: [ 19.532052] intel8x0_measure_ac97_clock: measured 54232 usecs (2613 samples)
Aug 21 06:55:48 kees-desktop kernel: [ 19.532057] intel8x0: clocking to 48000
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Aug 21 06:55:48 kees-desktop kernel: [ 19.562416] type=1505 audit(1282391748.772:11): operation="profile_load" pid=618 name="/usr/bin/evince-thumbnailer"
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): device state change: 4 -> 5 (reason 0)
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Aug 21 06:55:48 kees-desktop NetworkManager: <info> (eth0): device state change: 5 -> 7 (reason 0)
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Beginning DHCP transaction (timeout in 45 seconds)
Aug 21 06:55:48 kees-desktop dhclient: Internet Systems Consortium DHCP Client V3.1.3
Aug 21 06:55:48 kees-desktop NetworkManager: <info> dhclient started with pid 627
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Get) scheduled...
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Get) started...
Aug 21 06:55:48 kees-desktop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Get) complete.
Aug 21 06:55:48 kees-desktop dhclient: Copyright 2004-2009 Internet Systems Consortium.
Aug 21 06:55:48 kees-desktop dhclient: All rights reserved.
Aug 21 06:55:48 kees-desktop dhclient: For info, please visit https://www.isc.org/software/dhcp/
Aug 21 06:55:48 kees-desktop dhclient:
Aug 21 06:55:48 kees-desktop NetworkManager: <info> DHCP: device eth0 state changed (null) -> preinit
Aug 21 06:55:48 kees-desktop dhclient: Listening on LPF/eth0/00:0c:76:05:54:a2
Aug 21 06:55:48 kees-desktop dhclient: Sending on LPF/eth0/00:0c:76:05:54:a2
Aug 21 06:55:48 kees-desktop dhclient: Sending on Socket/fallback
Aug 21 06:55:49 kees-desktop gdm-binary[595]: WARNING: Unable to find users: no seat-id found
Aug 21 06:55:49 kees-desktop init: apport pre-start process (751) terminated with status 1
Aug 21 06:55:49 kees-desktop cron[757]: (CRON) INFO (pidfile fd = 3)
Aug 21 06:55:49 kees-desktop acpid: starting up with proc fs
Aug 21 06:55:49 kees-desktop anacron[773]: Anacron 2.3 started on 2010-08-21
Aug 21 06:55:49 kees-desktop acpid: 36 rules loaded
Aug 21 06:55:49 kees-desktop cron[775]: (CRON) STARTUP (fork ok)
Aug 21 06:55:49 kees-desktop init: apport post-stop process (769) terminated with status 1
Aug 21 06:55:49 kees-desktop cron[775]: (CRON) INFO (Running @reboot jobs)
Aug 21 06:55:49 kees-desktop acpid: waiting for events: event logging is off
Aug 21 06:55:49 kees-desktop anacron[773]: Will run job `cron.daily' in 5 min.
Aug 21 06:55:49 kees-desktop anacron[773]: Will run job `cron.weekly' in 10 min.
Aug 21 06:55:49 kees-desktop anacron[773]: Jobs will be executed sequentially
Aug 21 06:55:49 kees-desktop kernel: [ 20.273450] vboxdrv: Trying to deactivate the NMI watchdog permanently...
Aug 21 06:55:49 kees-desktop kernel: [ 20.273458] vboxdrv: Successfully done.
Aug 21 06:55:49 kees-desktop kernel: [ 20.273461] vboxdrv: Found 1 processor cores.
Aug 21 06:55:49 kees-desktop kernel: [ 20.276851] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Aug 21 06:55:49 kees-desktop kernel: [ 20.276858] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001).
Aug 21 06:55:49 kees-desktop NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/vboxnet0, iface: vboxnet0)
Aug 21 06:55:49 kees-desktop NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/vboxnet0, iface: vboxnet0): no ifupdown configuration found.
Aug 21 06:55:49 kees-desktop NetworkManager: <WARN> device_creator(): /sys/devices/virtual/net/vboxnet0: couldn't determine device driver; ignoring...
Aug 21 06:55:49 kees-desktop acpid: client connected from 829[0:0]
Aug 21 06:55:49 kees-desktop acpid: 1 client rule loaded
Aug 21 06:55:49 kees-desktop avahi-daemon[604]: Registering new address record for fe80::20c:76ff:fe05:54a2 on eth0.*.
Aug 21 06:55:51 kees-desktop gdm-session-worker[949]: GLib-GObject-CRITICAL: g_value_get_boolean: assertion `G_VALUE_HOLDS_BOOLEAN (value)' failed
Aug 21 06:55:52 kees-desktop dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
Aug 21 06:55:52 kees-desktop dhclient: DHCPOFFER of 192.168.0.18 from 192.168.0.1
Aug 21 06:55:52 kees-desktop dhclient: DHCPREQUEST of 192.168.0.18 on eth0 to 255.255.255.255 port 67
Aug 21 06:55:52 kees-desktop polkitd[1039]: started daemon version 0.96 using authority implementation `local' version `0.96'
Aug 21 06:55:53 kees-desktop dhclient: DHCPACK of 192.168.0.18 from 192.168.0.1
Aug 21 06:55:53 kees-desktop rtkit-daemon[1051]: Sucessfully called chroot.
Aug 21 06:55:53 kees-desktop rtkit-daemon[1051]: Sucessfully dropped privileges.
Aug 21 06:55:53 kees-desktop rtkit-daemon[1051]: Sucessfully limited resources.
Aug 21 06:55:53 kees-desktop rtkit-daemon[1051]: Running.
Aug 21 06:55:53 kees-desktop rtkit-daemon[1051]: Watchdog thread running.
Aug 21 06:55:53 kees-desktop rtkit-daemon[1051]: Canary thread running.
Aug 21 06:55:53 kees-desktop dhclient: bound to 192.168.0.18 -- renewal in 1585 seconds.
Aug 21 06:55:53 kees-desktop NetworkManager: <info> DHCP: device eth0 state changed preinit -> bound
Aug 21 06:55:53 kees-desktop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Aug 21 06:55:53 kees-desktop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) started...
Aug 21 06:55:53 kees-desktop NetworkManager: <info> address 192.168.0.18
Aug 21 06:55:53 kees-desktop NetworkManager: <info> prefix 24 (255.255.255.0)
Aug 21 06:55:53 kees-desktop NetworkManager: <info> gateway 192.168.0.1
Aug 21 06:55:53 kees-desktop NetworkManager: <info> nameserver '10.3.1.220'
Aug 21 06:55:53 kees-desktop NetworkManager: <info> nameserver '10.3.1.221'
Aug 21 06:55:53 kees-desktop NetworkManager: <info> nameserver '10.3.1.100'
Aug 21 06:55:53 kees-desktop NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled...
Aug 21 06:55:53 kees-desktop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) complete.
Aug 21 06:55:53 kees-desktop NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started...
Aug 21 06:55:53 kees-desktop avahi-daemon[604]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.18.
Aug 21 06:55:53 kees-desktop avahi-daemon[604]: New relevant interface eth0.IPv4 for mDNS.
Aug 21 06:55:53 kees-desktop avahi-daemon[604]: Registering new address record for 192.168.0.18 on eth0.IPv4.
Aug 21 06:55:53 kees-desktop rtkit-daemon[1051]: Sucessfully made thread 1047 of process 1047 (n/a) owned by '1000' high priority at nice level -11.
Aug 21 06:55:53 kees-desktop rtkit-daemon[1051]: Supervising 1 threads of 1 processes of 1 users.
Aug 21 06:55:53 kees-desktop rtkit-daemon[1051]: Sucessfully made thread 1083 of process 1047 (n/a) owned by '1000' RT at priority 5.
Aug 21 06:55:53 kees-desktop rtkit-daemon[1051]: Supervising 2 threads of 1 processes of 1 users.
Aug 21 06:55:54 kees-desktop rtkit-daemon[1051]: Sucessfully made thread 1084 of process 1047 (n/a) owned by '1000' RT at priority 5.
Aug 21 06:55:54 kees-desktop rtkit-daemon[1051]: Supervising 3 threads of 1 processes of 1 users.
Aug 21 06:55:54 kees-desktop NetworkManager: <info> (eth0): device state change: 7 -> 8 (reason 0)
Aug 21 06:55:54 kees-desktop NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS.
Aug 21 06:55:54 kees-desktop NetworkManager: <info> Activation (eth0) successful, device activated.
Aug 21 06:55:54 kees-desktop NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.
Aug 21 06:55:54 kees-desktop rtkit-daemon[1051]: Sucessfully made thread 1163 of process 1163 (n/a) owned by '1000' high priority at nice level -11.
Aug 21 06:55:54 kees-desktop rtkit-daemon[1051]: Supervising 4 threads of 2 processes of 1 users.
Aug 21 06:55:54 kees-desktop pulseaudio[1163]: pid.c: Daemon already running.
Aug 21 06:55:55 kees-desktop ntpdate[1154]: adjust time server 91.189.94.4 offset -0.294891 sec
Aug 21 06:55:55 kees-desktop acpid: client connected from 1195[108:114]
Aug 21 06:55:55 kees-desktop acpid: 1 client rule loaded
Aug 21 06:55:58 kees-desktop kernel: [ 29.720017] eth0: no IPv6 routers present
Aug 21 06:55:59 kees-desktop pulseaudio[1047]: ratelimit.c: 5 events suppressed
Aug 21 06:56:29 kees-desktop kernel: [ 60.259661] __ratelimit: 9 callbacks suppressed
Aug 21 06:56:29 kees-desktop kernel: [ 60.259669] operapluginwrap[1289]: segfault at 0 ip (null) sp bffc469c error 4 in libgcc_s.so.1[110000+1d000]
Aug 21 06:56:32 kees-desktop kernel: [ 63.531038] operapluginwrap[1294]: segfault at 0 ip (null) sp bfc1f74c error 4 in libX11.so.6.3.0[110000+119000]
Aug 21 06:56:32 kees-desktop kernel: [ 63.554740] operapluginwrap[1295]: segfault at 0 ip (null) sp bf99b4dc error 4 in libm-2.11.1.so[110000+24000]
Aug 21 06:56:32 kees-desktop kernel: [ 63.585637] operapluginwrap[1296]: segfault at 0 ip (null) sp bfb628dc error 4 in libstdc++.so.6.0.13[110000+e9000]
Aug 21 06:56:32 kees-desktop kernel: [ 63.627198] operapluginwrap[1298]: segfault at 0 ip (null) sp bfeca1fc error 4 in libXt.so.6.0.0[110000+4f000]
Aug 21 06:56:34 kees-desktop kernel: [ 65.017326] operapluginwrap[1301]: segfault at 0 ip (null) sp bfc0391c error 4 in libXau.so.6.0.0[110000+2000]
Aug 21 06:56:34 kees-desktop kernel: [ 65.030604] operapluginwrap[1302]: segfault at 0 ip (null) sp bf87943c error 4 in libuuid.so.1.3.0[110000+3000]
Aug 21 06:56:34 kees-desktop kernel: [ 65.044349] operapluginwrap[1303]: segfault at 0 ip (null) sp bf8b4a1c error 4 in libstdc++.so.6.0.13[110000+e9000]
Aug 21 06:56:54 kees-desktop kernel: [ 85.624468] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
Aug 21 06:57:05 kees-desktop AptDaemon: INFO: Initializing daemon
Aug 21 07:00:34 kees-desktop avahi-daemon[604]: Invalid query packet.
Aug 21 07:00:49 kees-desktop avahi-daemon[604]: last message repeated 2 times
Aug 21 07:00:49 kees-desktop anacron[773]: Job `cron.daily' started
Aug 21 07:00:49 kees-desktop anacron[1360]: Updated timestamp for job `cron.daily' to 2010-08-21
Aug 21 07:02:06 kees-desktop AptDaemon: INFO: Quiting due to inactivity
Aug 21 07:02:06 kees-desktop AptDaemon: INFO: Shutdown was requested

quote:

Op zaterdag 21 augustus 2010 16:57 schreef wdn het volgende:

grep error Xorg.0.log

Waar type ik dit in?

(sorry sorry )

... die operaplugin zit je dwars denk ik.

(segfault).