FOK!forum / Vraag & Aanbod / [TK] Oude platenspeler, Techniks SL J11OR
Haremaandag 20 maart 2006 @ 19:51


Kan helaas niks anders vinden dan deze voorkant van de gebruiksaanwijzing.

Hij is nog in goede staat, meer kan ik er niet over kwijt.

25 euro excl.
Harewoensdag 29 maart 2006 @ 22:29
kick!
Thetallguywoensdag 29 maart 2006 @ 22:32
Op te halen in Doetinchem of kom je ook weleens in de bewoonde wereld?
Harewoensdag 29 maart 2006 @ 23:04
Nijmegen en Doetinchem zijn ook opties, net als verzenden
sasquatschdonderdag 30 maart 2006 @ 13:23
Met of zonder ingebouwde voorversterker?
Haredonderdag 30 maart 2006 @ 18:10
Geen idee, is dat ergens aan te zien?
sasquatschdonderdag 30 maart 2006 @ 20:40
quote:
Op donderdag 30 maart 2006 18:10 schreef Hare het volgende:
Geen idee, is dat ergens aan te zien?
Doet-ie het ook op een standaard AUX-ingang van een versterker i.p.v. de PHONO ingang.
Haredonderdag 30 maart 2006 @ 22:00
Dus heeft ie gewoon een rode en witte uitgang nodig toch?
sasquatschvrijdag 31 maart 2006 @ 15:31
Ja, maar als je 'm op de AUX ingang aansluit is het geluid van een platenspeler zonder voorversterker bijna niet te horen, omdat het geluid vervormd is.

Zie onderstaande tekst:

"The problem most people encounter with a turntable is that its output
can’t be plugged directly into the line level input of any recorder.
Most turntable cartridges put out a signal on the order of just a
couple of milliVolts (mV). The turntable also can’t just be plugged
directly into the mic inputs on a mixer, recorder or computer, even
though they are setup to handle a signal with an amplitude of only a
couple of mV. The reason is that when LP vinyl records are recorded,
they have a special equalization curve (called the RIAA EQ curve)
applied to the signal. The RIAA is the Record Industry Association of
America. This special EQ curve is used to limit low frequencies and
accentuate high frequencies when the disk is made to account for the
limitations of the vinyl LP medium. Then when the LP disk is played
back, the opposite EQ curve is applied to flatten the signal out again
(i.e., accentuate the low frequencies and reduce the high
frequencies). This special EQ resides in what is known as a phono
preamplifier."