[TK] Compleet dual P3 1 GHz systeem

quote:

Specifications

Processor
Dual Socket 370 for Intel® FCPGA Pentium® III 500MHz~1130MHz+

Chipset
VIA® 694XDP 133MHz AGPset with VT82C686B South Bridge
Supports UltraDMA/100 IDE Devices

System Memory
4 x 168-pin DIMMs Sockets Support up to 4GB 3.3V Registered/Unbuffered PC133/100 SDRAM
ECC or Parity Support
Supports Virtual Channel Memory (VCM)

Expansion Slots
5 x PCI
1 x AGP PRO/4X

IDE Ports
2 x UltraDMA/100 Bus Master IDE Ports to Support Up to 4 ATAPI Devices

Back Panel I/O Ports
1 x PS/2 Keyboard Port, 1 x PS/2 Mouse Port
2 x USB Ports
2 x Serial Ports
1 x Parallel Port (with EPP and ECP Support)
1 x Game/MIDI (Optional)
1 x Audio I/O (Optional)

Onboard I/O Interface
One Header Supports Additional 2 USB Ports
20-pin ASUS® Panel
IrDA (SIR)
CD/AUX/Modem Audio In
CPU1/CPU2/Power Supply/Chassis Fan
ATX Power

Special Features
Power Loss Restart
ASUS® JumperFree?
CPU Throttle

ATX Power Connector
ATX 20-pin Power Connector for 3V, 5V, 5VSB and 12V
Soft Power Off & Keyboard Power On Support
Wakeup on Modem, LAN, Keyboard, Mouse & RTC Timer
Supports AC Power Loss Recovery
6-Pin AUX Power Connector

BIOS
Award® 2Mb BIOS with Full ACPI, DMI, Green, PnP, Trend® ChipAway Virus (TCAV)
ASUS® JumperFree? or Jumper Setting by Software
Vcore, CPU/PCI Ratio & Boot Media Selections

Accessories
User's Manual
Support CD
UltraDMA/100 IDE Cable
Floppy Cable

Dimensions
ATX Form Factor : 12.0" x 9.6" (30.5cm x 24.4cm)


Features

Latest Intel Processor Support
Intel Pentium® III 133MHz FSB, Coppermine core, FC-PGA
Intel Pentium® III 100MHz FSB, Coppermine core, FC-PGA

North Bridge System Chipset
Features VIA® VT82C694XDP system controller PCI-to-ISA bridge with support for AGP 4X/2X mode; 133/100 MHz Front Side Bus (FSB); and 133MHz memory bus.

South Bridge System Chipset
VIA® VT82C686B PCIset with PCI Super I/O integrated peripheral controller supports UltraDMA/100/66 for burst mode data transfer rates of up to 100MB/sec, and USB controller with root hub for four USB ports.

PC133 Memory / VCM / HSDRAM Support
Equipped with four Dual Inline Memory Module (DIMM) sockets to support up to 4GB of memory using Intel PC133/100-compliant or NEC's VC133-compliant Virtual Channel (VC) SDRAMs, and Enhanced Memory System's High-speed DRAMs (HSDRAMs). VC SDRAM and HSDRAM are new DRAM core architectures that dramatically improves the memory system's ability to service high multimedia requirements.

JumperFree? Mode
Allows processor setting and easy overclocking of frequency and Vcore voltage through BIOS setup when the JumperFreeTM mode is enabled. Easy-to-use DIP switches come with the motherboard to allow manual adjustment of the processor external/internal frequency.

UltraDMA/100 Support
Comes with an onboard PCI Bus Master IDE controller with two connectors that support four IDE devices on two channels. Supports UltraDMA/100, UltraDMA/66, UltraDMA/33, PIO Modes 3 & 4, Bus Master IDE DMA Mode 2, and Enhanced IDE devices, such as DVD-ROM, CD-ROM, CD-R/RW, LS-120, and Tape Backup drives.

AGP Pro Slot
Comes with an Accelerated Graphics Port (AGP) Pro slot that support high performance AGP cards targeted at 3D graphical applications supporting 133MHz 4X mode. The slot is backward compatible with AGP 4X/2X cards.

Wake-On-LAN
Supports Wake-On-LAN activity through a WOL connector or an optional ASUS PCI-L101 10/100 Fast Ethernet PCI card.

Wake-On-Ring
Supports Wake-On-Ring activity through a PCI modem card that supports a WOR connector.

PC Health Monitoring
Provides an easier way to examine and manage system status information, such as CPU and system voltages, temperatures, and fan status through the onboard hardware ASUS ASIC and the bundled ASUS PC Probe.

SMBus
Features the System Management Bus Interface, which is used to physically transport commands and information between SMBus devices.

PCI/AMR Expansion Slots
Provides two 32-bit PCI (Rev. 2.2) expansion slots that support Bus Master PCI cards, such as SCSI or LAN cards, with 133MB/s maximum throughput

Super Multi-I/O
Provides two high-speed UART compatible serial ports and one parallel port with EPP and ECP capabilities. UART2 can also be directed from COM2 to the Infrared Module for wireless connections.

Enhanced ACPI & Anti-Boot Virus Protection
Programmable BIOS (Flash EEPROM), offering enhanced ACPI for Windows 98 compatibility, built-in firmware-based virus protection, and autodetection of most devices for virtually automatic setup.

Smart BIOS
2Mb firmware provides Vcore and CPU/SDRAM frequency adjustments, boot block write protection, and HD/SCSI/MO/ZIP/CD/Floppy boot selection.

IrDA
Supports an optional infrared port module for wireless interface.

Concurrent PCI
Concurrent PCI allows multiple PCI transfers from PCI master buses to memory and processor.

Desktop Management Interface (DMI)
Supports DMI through BIOS that allows hardware to communicate within a standard protocol and create a higher level of compatibility. (Requires DMI-enabled components.)

Onboard LED
Comes with a power LED that light up if there is any standby power on the motherboard. This LED acts as a reminder to turn off the system power before plugging or unplugging devices to prevent damage to the motherboard, peripherals, and other system components.

ACPI Ready
Advanced Configuration Power Interface (ACPI) provides more Energy Saving Features for future operating systems (OS) supporting OS Direct Power Management (OSPM) functionality. With these features employed in the OS, PC can be ready around the clock, yet satisfy all the energy saving standards. To fully utilize the benefits of ACPI, an ACPI-supported OS, such as Windows 98/SE/ME/2000 must be used.

PC ' 99 Compliant
Both the BIOS and hardware levels of this series of motherboards meet PC ' 99 compliancy. The new PC ' 99 requirements for systems and components are based on the following high-level goals: Support for Plug and Play compatibility and power management for configuring and managing all system components, and 32-bit device drivers and installation procedures for Windows 95/98/NT. Color-coded connectors and descriptive icons make identification easy as required by PC ' 99.

Auto Fan Off
The system fans will power off automatically even in sleep mode. This function reduces both energy consumption and system noise, and is an important feature in implementing silent PC systems.

Dual Function Power Button
Pushing the power button for less than 4 seconds when the system is in the working state places the system into one of two states: sleep mode or soft-off mode, depending on the BIOS or OS setting. When the power button is pressed for more than 4 seconds, the system enter the soft-off mode regardless of the BIOS setting.

Fan Status Monitoring and Alarm
To prevent system overheat and system damage, the CPU, power supply, and system fans can be monitored for RPM and failure. All fans are set for its normal RPM range and alarm thresholds.

Power LED (requires ACPI OS Support)
The power LED indicates the system status.

Remote Ring On (requires modem)
This allows a computer to be turned on remotely through an internal or external modem. With this benefit on-hand, users can access any information from their computers anywhere.

System Resources Alert
Today's operating systems such as Windows 95/98/NT and OS/2, require much more memory and hard drive space to present enormous user interfaces and run large applications. The system resource monitor will warn the user before the system resources are used up to prevent possible application crashes. Suggestions will give the user information on managing their limited resources more efficiently.

Temperature Monitoring and Alert
CPU temperature is monitored by the ASUS ASIC through the CPU's internal thermal diode (on Pentium III and Celeron) to prevent system overheat and system damage.

Voltage Monitoring and Alert
System voltage levels are monitored to ensure stable current to critical motherboard components. Voltage specifications are more critical for future processors, so monitoring is necessary to ensure proper system configuration and management.